VoIPware.ca - Your On-line Canadian Source for VoIP

Phone no's:

647-722-5627

888-312-3747


	Shoping Cart

now in your cart 18 items

Specials

Advanced Search

Shipping and Returns

Your IP Address is:

38.107.191.113

Accessories

DSL Modems

IP Phones

VoIP Analog Adaptors

VoIP Asterisk Hardware

Wireless VoIP

Video IP Phones

Used Items




Advanced Search

Product

Click to enlarge


A102D [A102D]
Item #: 105 This product was added to our catalog on Monday 05 March, 2007.



~~$1,599.99~~ $1,579.99

Item Description

Sangoma A102D Dual T1/E1 Interface Card - Asterisk Interoperable with Echo Cancellation

The Sangoma A102D is next generation hardware designed for optimum support of data and voice over T1 and E1 with Echo Cancellation

Voice Modes

- Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
- Block mode raw bit-stream interface for integration with the Asterisk Open Source PBX/IVR platform.
- Channelized mode supporting individual DMA into voice timeslots plus onboard HDLC support of PRI channel for soft PBX implementations that can use these features.

Sangoma A102D Technical Specifications

- Echo Cancellation
- Available as Single T1/E1 port (A101D) or Dual T1/E1 port (A102D) with daughterboard
- Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes:
- T1/E1 and fractional T1/E1, single channel HDLC per line
- Optionally available as A101-C 0r A102-C with Channelized T1/E1 on either or both ports with any configuration of up to 64 DS0s carrying either voice or HDLC data
- Power: 520mA at +5v
- MTBF: > 1 Million hours (Calculated).
- PCI 32 bit (5v and 64 bit (3.3v) compatible.
- Temperature range: 0 - 45C.
- All set-up and configuration is in software or by machine BIOS.
- DSU/CSU set up entirely in software.
- Line decoding: HDB3, AMI, B8ZS.
- Framing: CRC4, non-CRC4, ESF, D4T1/E1.
- Clocking mode: Normal , Master.
- Software controlled DSU/CSU test modes.
- Remote monitoring of card and CSU/DSU operation.
- Dimensions: 2U Form factor: 120mm x 55 mm.

T1/E1 Status alarms

- ALOSV: Loss of Signal alarm
- LOS: Receive Loss of Signal
- ALTLOS: Alternate loss of Signal Status
- OOF: Out of Frame
- RED: Telco Red Alarm condition
- AIS: Alarm Indication Signal
- OOSMFV: Loss of Signaling Multiframe
- OOCMFV: Loss of CRC Multiframe
- OOOFV: Out of Off-Line Frame
- RAIV: Receive Loss of Signal
- YEL: Receive Telco Yellow Alarm
- Line protocols
- ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.

Operating systems

- Linux (all versions, releases and distributions from 1.0 up), FreeBSD, Open BSD.

Higher level protocols

- IP/IPX over Frame Relay/ PPP/ HDLC/ X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (DMT and TCOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.

Warranty

- Five years parts and labour. Manufacturer Warranty.

For more information, please visit this products webpage.

Home

My account

New products

Shopping cart

Checkout